Flow metering, measurement and control equipment

for hydraulic oil, phosphate esters, water, diesel fuels and air or other compressed gases

Débimétrie

PISTON FLOW METER

Range of very robust flow meters using variable section technology to measure the flow of oil, other fluids and gases.
Manufactured with an aluminium, stainless steel, plastic or brass housing.
Can be used for low to very high pressures, allowing operation even at high temperature.

Available for 1/4″ to 3″. Can operate in any position. 2% full scale accuracy. Available for a wide range of viscosities with no impact on the accuracy.

Débimètre piston analogie

PISTON FLOW METERS – DRY CONTACT OR ANALOGUE OUTPUT

Same features as the visual range, but with the possibility of controlling the flow with an alarm or an analogue signal (4-20 mA or 0-10 VDC or 0-5 VDC).

In the analogue version, the instantaneous flow and by totalizer is included. Very easy to install and operate, these flow meters can be integrated in lubrication control and monitoring systems and can be used for other industrial applications. Available up to the size 1″1/2.

Testeur hydraulique portable

DIGITAL AND VISUAL PORTABLE HYDRAULIC TESTERS

Compact and self-contained, these testers provide fast diagnostic troubleshooting for all mobile or stationary hydraulic systems. A bi-directional version is also available to check engines and is all-digital with a dynamometer. 1% full scale accuracy.

Range of visual hydraulic testers, with load valve, up to 560 l/min and 400 bar.

Débimètres à engrenages

GEAR / OVAL GEAR FLOW METERS

These flow meters provide a 0.5% high full scale measurement accuracy and provide readings over a very wide range from 0.001 l/min up to 700 l/min (example: 0.01-3 l/min; 4-450 l/min). Fluids with a low viscosity up to very high viscosities (1-2,000 cst) can also be measured. Many materials are available with 316L stainless steels.

Version with digital displays, pulse output or 4-20 mA. An ATEX version is also available.

Turbines hydrauliques

HYDRAULIC TURBINES AND DIGITAL DISPLAYS

Range of very robust flow meters using turbine technology to measure the flow of oils and other fluids.

Manufactured with an aluminium housing and can be used for low to very high pressures, allowing operation up to 150°C.

Flow measurement up to 1320 l/min. 1% full scale accuracy. Available with digital displays (4-20 mA or frequency signal input), for direct or alternating current. An ATEX version is also available.

Turbines industrielles

INDUSTRIAL TURBINES

Range of robust stainless steel flow meters for low to very high pressures using turbine technology to measure the flow of water and other fluids.

Very large range available for 1/2″ to 10″ and flow up to 19,000 l/min. Different connections available (NPT, BSPP, Flanges or Victaulic) and a flange version.

Available with digital displays or can be integrated with other instruments, PLCs, etc. 1% readout accuracy.

An ATEX version is also available.

You would like:

Get more information

on one of our products

Receive free advice

We deliver our best filtration equipment